51 13 280 Removing And Installing/Replacing Trim Strip On Roof Frame At Left Or Right
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools Required
- 00 9 321
Lever out trim strip (1) with special tool 00 9 321 starting at rear.
Unclip trim strip (1) in direction of arrow.
Installation:
Clips (1) and seals (2) on trim strip (3) must not be damaged.
If necessary, replace faulty clips (1).
Position of clips (1) on trim strip (3) is determined by notch (4).
Installation:
Push trim strip (1) at front into seal (2).
Trim strip (1) must be flush with edge (3) at rear.