51 12... Removing And Installing/Replacing Lower Cover On Rear Bumper
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Prior to removing, pay attention to the exact installation position with respect to the adjoining components.
Release screws (1 and 2).
Feed out cover (3) towards rear and remove.
Installation:
Make sure cover (3) is correctly seated.
Replacement:
- Modify sheet nuts, replace faulty sheet nuts if necessary.