51 16... Removing And Installing/Replacing Trim For Storage Compartment At Rear

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools Required

00 9 317 TRIM PANEL WEDGE

Version without center armrest:

Partially fit special tool 00 9 317 as illustrated.

Lever trim (1) upwards out of catches (2) and remove.

Fig 1: Identifying Lever Trim & Catches

G05779085

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1) on trim (2) must not be damaged.

Fig 2: Identifying Catches On Trim

G05779086

Courtesy of BMW OF NORTH AMERICA, INC.

Version with center armrest:

Lever out trim (2) on catches (1) with special tool 00 9 317 and remove in direction of arrow.

Fig 3: Identifying Trim & Catches

G05779087

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1) on trim (2) must not be damaged.

Fig 4: Identifying Catches On Trim

G05779088

Courtesy of BMW OF NORTH AMERICA, INC.