51 16... Removing And Installing/Replacing Inside Corner Trim On Front Door

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Version with speaker:

Remove door trim panel

Push corner trim (1) slightly upward and release in inward direction from retainers (2).

Remove corner trim (1) from seal (3) and door trim panel (4).

If necessary, disconnect plug connection and remove corner trim (1).

Installation:

If necessary, moisten seal (3) with water in order to fit corner trim (1).

Ensure the corner trim (1) is seated correctly on seal (3) and door trim panel (4).

Fig 1: Identifying Corner Trim, Seal & Door Trim Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1) and sound insulation (2) of corner trim must not be damaged.

Fig 2: Identifying Catches

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Modify speaker