51 16 195 Removing And Installing Center Armrest

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools Required

00 9 317 TRIM PANEL WEDGE

Lever out cover (1) and release nut (2) underneath.

Fig 1: Identifying Cover & Nut

G05779129

Courtesy of BMW OF NORTH AMERICA, INC.

Lever out catches (1) on trim (2) with special tool 00 9 317 and remove.

Fig 2: Identifying Catches On Trim With Special Tool

G05779087

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1) on trim (2) must not be damaged.

Fig 3: Identifying Catches On Trim

G05779088

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) and nuts (2) on center armrest (3).

Fig 4: Identifying Center Armrest, Screws & Nut

G05779132

Courtesy of BMW OF NORTH AMERICA, INC.

Raise storage compartment (1) slightly and extend center armrest (2) in downwards direction.

Fig 5: Identifying Center Armrest

G05779133

Courtesy of BMW OF NORTH AMERICA, INC.