LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1936 (Body Equipment - Repair (E82)) >> Instrument Cluster Trim Panel >> 51 45 275 Removing And Installing (Replacing) Outer Trim On Right Glovebox

51 45 275 Removing And Installing (Replacing) Outer Trim On Right Glovebox

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Release screws (1) on trim (2).

Fig 1: Identifying Trim & Screws
G05779355Courtesy of BMW OF NORTH AMERICA, INC.

Unclip trim (1) downwards from retainer (2).

Feed trim (1) sideways out of guides (3) and remove.

Installation: 

Guides (3) must not be damaged.

If necessary, replace faulty retainer (2).

Fig 2: Identifying Faulty Retainer & Guides
G05779356Courtesy of BMW OF NORTH AMERICA, INC.