51 71... Removing And Installing/Replacing Left Spring Support Passage Cover

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

If necessary, remove left front wheel .

NOTE: Description is shown on the E82 by way of example. There may be differences in detail in the case of other models.

NOTE: Spring strut removed for purposes of clarity.

Release catch (1) and remove cover (2).

Installation:

Catch (1) must not be damaged.

Note correct position of cover (2).

Fig 1: Identifying Plastic Nuts & Screws

Courtesy of BMW OF NORTH AMERICA, INC.