LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1936 (Body Equipment - Repair (E82)) >> Gaskets, Seals, Loose Body Components >> 51 71... Removing And Installing/Replacing Left Or Right Steering Gear Cover

51 71... Removing And Installing/Replacing Left Or Right Steering Gear Cover

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

NOTE:

Description is shown on the E82 by way of example. There may be differences in detail in the case of other models.

Prior to removing, pay attention to the exact installation position with respect to the adjoining components.

The operation is described on the left side; proceed in the same way for the right side.

NOTE: Spring strut removed for purposes of clarity.

Release screw (1) and plastic nuts (2).

Feed out cover (3) and remove.

Installation: 

Fig 1: Identifying Plastic Nuts & Screws
G05779423Courtesy of BMW OF NORTH AMERICA, INC.