51 33... Normalization Of Power Window Units
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Normalization must be carried out after the following work:
- Removal or replacement of power window unit or window glass
- Coding/programming of footwell module (or junction box)
The following functions are deactivated after a denormalization:
- Short-stroke function
- Anti-trapping protection
- Toll closing
Normalization/denormalization of the power window units is possible via the diagnosis system under the following path:
=> Diagnosis
=> Footwell module (or junction box)
=> Control unit functions
=> Footwell module (or junction box)
=> Component activation