51 11 150 Removing And Installing/Replacing Left Or Right Spoiler On Bumper Trim (M Technic Aerodynamic Kit)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Prior to removing, pay attention to the exact installation position with respect to the adjoining components.

Release screws (1).

Pull out spoiler (2) towards rear and remove.

Installation:

Make sure spoiler (2) is correctly seated in bumper trim.

Fig 1: Pulling Spoiler

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Modify sheet nut (1), replace if necessary.

Fig 2: Identifying Sheet Nut
Courtesy of BMW OF NORTH AMERICA, INC.