33 55 041 Replacing anti-roll bar link for anti-roll bar on left or right
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 31 1 140
Release nut (1), gripping with special tool 31 1 140 in the process.
Installation:
Replace self-locking nut.
See Tightening torque 33 55 2AZ in 33 55 STABILIZER BAR .
Release screw (3).
See Tightening torque 33 55 3AZ in 33 55 STABILIZER BAR .
Remove stabilizer link (2) towards top.