LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1929 (Front Axle - Repair) >> Struts With Rubber Mounts >> 31 12 024 Replace wheel control joint in wishbone (all-wheel drive vehicle)

31 12 024 Replace wheel control joint in wishbone (all-wheel drive vehicle)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:  Remove front wheel

Release screws. If necessary, push wheel control joint off swivel bearing using a suitable tool.

Installation note: Recondition thread in swivel bearing. Keep recess for wheel control joint, bushing in trailing link and wheel control joint journal clean and free from grease. Replace microencapsulated screws.

Tightening torque, see 31 12 21AZ in 31 12 CONTROL ARMS AND STRUTS .

scientia non olet · About LEMON Manuals