61 31 241 Removing And Installing/Replacing Bonnet/Hood Contact Switch
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect plug connection (1).
Release catches (2) and feed bonnet/hood contact switch (3) in direction of arrow out of fixture (4).
Installation:
Make sure bonnet/hood contact switch (3) is correctly seated in holder (4).