61 67 010 Removing And Installing/Replacing Washer Pump Of Headlight Washer System

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Release fluid reservoir for windshield washer system and pull out

Disconnect plug connection (1).

NOTE: Catch any escaping washer fluid if necessary.

Open split pin (3) and detach hose (2) from washer pump of headlight cleaning system (4).

If necessary, turn washer pump of headlight cleaning system (4) and pull out of fluid reservoir for windshield washer system (5).

Fig 1: Disconnecting Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Replace strainer for washer pump of headlight washer system.
Coat sealing ring of washer pump for headlight cleaning system with anti-seize agent.
Lay hose of washer pump for headlight cleaning system without kinks
Fill fluid reservoir