13 31 Fuel Pump with Drive and Pipes
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
FUEL PUMP TIGHTENING SPECIFICATION
| Type | thread | tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Fuel pump to engine | All | 12 Nm | ||
| 2AZ Fuel pipe coupling bolt | All / with K-Jetr. | M8 | 9 Nm | |
| 3AZ Fuel pipe coupling bolt | All / with K-Jetr. | M12 | 20 Nm | |
| 4AZ Fuel pipe to pressure regulator | All / with L-Jetr. | 30 Nm | ||
| 5AZ Return pipe connector to pressure regulator | All / with L-Jetr. | 27 Nm |