34 21 Rear Brake
WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
REAR BRAKE - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Brake drum/disc to wheel hub | E39 / E38 / E46 / E52 / E53 / E83 / E85 / E86 / E65 / E66 / E67 / E60 / E61 / E63 / E64 | 16 Nm | ||
| 2AZ Wheel brake cylinder to brake anchor plate | E36 | 10 Nm | ||
| 3AZ Brake carrier on semi-trailing arm/wheel carrier | E65 / E66 / E67 / E60 / E61 / E63 / E64 | 110 Nm | ||
| E46 / E85 / E86 / E86 | 65 Nm | |||
| E83 | M10 | Replace microencapsulated screws | 65 Nm | |
| 5AZ Guide bolt | E39 / E38 / E46 / E52 / E53 / E83 / E85 / E86 / E65 / E66 / E67 / E60 / E61 / E63 / E64 | wrench size 7 mm | 30 - 5 Nm | |
| 6AZ Protective plate to wheel carrier | E85 / E86 / E83 | M6 | 9 Nm | |
| E85 / E86 / E83 | M8 | 15 Nm | ||
| E60 / E61 / E63 / E64 / E65 / E66 / E67 | M6 | 12 Nm |