25 11 Shift Console - Manual Transmission
WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
SHIFT CONSOLE - MANUAL TRANSMISSION - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Front console to shift console | E36 / E38 / E39 / E46 / E53 / E60 / E61 / E63 / E64 / E83 / E85 / E86 / E87 / E90 / E91 / E92, with sheet metal console | 25 Nm | ||
| 2AZ Shift console to transmission | E36 / E38 / E39 / E46 / E53 / E60 / E61 / E63 / E64 / E83 / E85 / E86 / E87 / E90 / E91 / E92, with sheet metal console | 23 Nm | ||
| 3AZ Rear shift console to body | E36 / E38 / E39 / E46 / E53 / E60 / E61 / E63 / E64 / E83 / E85 / E86 / E87 / E90 / E91 / E92 | 11 Nm | ||
| 4AZ Aluminum shift arm console to transmission | E30 / M3 | 21.5 Nm | ||
| 5AZ Aluminum shift arm to console | E30 / M3 | 11 Nm | ||
| 6AZ Shift arm console to body | E36 / E38 / E39 / E46 / E53 / E60 / E61 / E63 / E64 / E83 / E85 / E86 / E87 / E90 / E91 / E92 | 21 Nm | ||
| E31 | 9 Nm | |||
| 7AZ Adjustable shift rod (clamping sleeve) | E31 | 23 Nm | ||
| 8AZ Support bearing to transmission tunnel | E53 | 21.5 Nm | ||
| 10AZ Hose clamp, vibration damper | E60 / E61 | 6 Nm |