24 30 Hydraulic / electric control parts and controlling elements
WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
HYDRAULIC / ELECTRIC CONTROL PARTS AND CONTROLLING ELEMENTS - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Valve body to transmission | 3HP-22 | M6 | 11 Nm | |
| 4HP-22 / 4HP-24 / A5S 310Z / A5S 440Z / A5S 300J / A5S 325Z / GA6HP19Z / GA6HP26Z / GA6HP32Z | M6 | 8 Nm | ||
| A4S 270R / A4S 310R | 5/16 inch | 20 Nm | ||
| A5S 360R / A4S 360R | M6 | 11 Nm | ||
| A5S 560Z | M6 x 12 | 6 Nm | ||
| A5S 560Z | M6 x 55 | 8 Nm | ||
| GA6L45R | M5 Torx | 8 Nm | ||
| 2AZ Valve housing to valve body | A4S 200R / A4S 270R / A4S 310R / A5S 300J / A5S 310Z / A5S 310Z / A5S 440Z / A5S 560Z / A5S 360R / A5S 390R / GA6HP19Z / GA6HP26Z / GA6HP32Z | M6 | 5 Nm | |
| 3AZ Adapter plate on shift unit | A4S 270R / A4S 310R | 13 Nm | ||
| 4AZ Input and output speed sensors to mechatronics | M6 | 12 Nm |