22 11 Engine Suspension
WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE SUSPENSION - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Engine mount to front axle support | E52 / E85 / E86 | 42 Nm | ||
| E65 / E66 / E67 | M8-8 | 19 Nm | ||
| E60 / E61 / E63 / E64 / E83 | M8-8 | 21 Nm | ||
| E53 | M8-10.9 | 30 Nm | ||
| E87 / E90 / E91 / E92 / E93 / E70 / E71 / E83 / E81 / E82 / E88 | M8 10.9 | 28 Nm | ||
| E70 / E71 / E83 | M10 | 38 Nm | ||
| E92 / E90 / S65 | M10 | 56 Nm | ||
| 2AZ Engine mount to engine support arm | E60 / E61 / E63 / E64 / E65 / E66 / E67 / E53 / E83 / E87 / E90 / E91 / E92 / E93 / E70 / E71 / E81 / E82 / E88 | M10 10.9 | 56 Nm | |
| E65 / E66 / E67 | M12 10.9 | 100 Nm | ||
| E70 / E71 / E83 | M12 | 68 Nm | ||
| E85 / E86 / E52 | 42 Nm | |||
| E92 | M10 | 38 Nm | ||
| 3AZ Engine support arm to engine | E60 / E61 / E63 / E64 / E65 / E66 / E67 / E83 / E87 / E90 / E91 / E70 / E71 / E81 / E82 / E92 / E93 / E88 | M10 8.8 | 38 Nm | |
| N51 / N52 / N52K / N53 | M12 | Aluminum screws marked blue must be replaced | ||
| 1. Jointing torque | 34 Nm | |||
| 2. Angle of rotation | 100 ° | |||
| E60 / E61 / E65 / E66 / E67 | M8 8.8 | 19 Nm | ||
| E85 / E83 | M8 8.8 | 21 Nm | ||
| E70 / E71 | M10 10.9 | 56 Nm | ||
| E53 (N62/ M54) | 38 Nm | |||
| E53 (M57) | 65 Nm | |||
| N54 | M12 | N54 engine only | 66 Nm | |
| 4AZ Engine mount to mounting bracket | E65 / E60 / E61 / E63/E64 | M8 8.8 | 21 Nm | |
| 5AZ Mounting bracket to front axle carrier | E65 / E60 / E61 / E63 / E64 | M8-8 | 21 Nm | |
| 6AZ Vibration damper to engine carrier | E70 / E71 | 19 Nm | ||
| 7AZ Reinforcement plate to front axle | E90 / E91 / E92 | M8 | 19 Nm | |
| carrier | ||||
| 8AZ Support angle to engine mount or front axle carrier | E90 / E91 / E92 | M8 | 19 Nm |