61 0 300 Releasing tool (complete kit)

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Measuring and testing equipment

Note: Replaces from 09/2005 special tool 61 1 150. From 06/2006 extended by tools 61 0 325 - 61 0 331

Series: E30, E30/C, E30tou, E31, E32, E32/3, E34, E34tou, E36, E36/2, E36/3, E36/5, E36/7, E36/C, E36tou, E38, E38/3, E39, E39PL, E39tou, E46, E46/16, E46/2, E46/3, E46/5, E46/C, E52, E53, E60, E61, E63, E64, E65, E66, E67, E68, E70, E71, E81, E82, E83, E85, E86, E87, E88, E90, E91, E92, E93, F01, R50, R52, R53, R55, R56, RR1, RR2

Fig 1: Identifying Releasing Tool (Complete Kit) (61 0 300)

Courtesy of BMW OF NORTH AMERICA, INC.

SI number: 2 05 05 (217)

Order number: 61 0 300 Releasing tool (complete kit)

Consisting of:

1 = 61 0 301 Release tool for round contacts (diameter 1.5)

NOTE: Replaces special tool 61 1 131 from 09/2005

2 = 61 0 302 Replacement sleeve D=1.5

NOTE: Replaces special tool 61 1 157 from 09/2005

In conjunction with: 61 3 301

3 = 61 0 303 Release tool for round systems with D=2.5

NOTE: Replaces special tool 61 1 132 from 09/2005

4 = 61 0 304 Replacement sleeve (D=2.5)

NOTE: Replaces special tool 61 1 156 from 09/2005

5 = 61 0 305 Release tool for round contacts (D=3.5)

NOTE: Replaces special tool 61 1 133 from 09/2005

6 = 61 0 306 Replacement sleeve (D=3.5) for 61 0 305

NOTE: Replaces special tool 61 1 155 from 09/2005

7 = 61 0 307 Release tool for jack-side round contacts (D=1.5)

8 = 61 0 308 Replacement sleeve for special tool 61 0 307 (D=1.5)

9 = 61 0 309 Release tool for pin-side round contact (D=1.5) manuf. by Kostal

NOTE: Replaces special tool 61 1 139 from 09/2005

10= 61 0 311 Replacement sleeve for special tool 61 0 309

NOTE: Replaces special tool 61 1 154 from 09/2005

11= 61 0 312 Release tool for flat spring contact with a detent lug (1.6 mm)

NOTE: Replaces special tool 61 1 134 from 09/2005

12= 61 0 313 Release tool for flat spring contact with a detent tongue (1.9 mm)

NOTE: Replaces special tool 61 1 137 from 09/2005

13= 61 0 314 Release tool for flat spring contact with a detent tongue (2.7 mm)

NOTE: Replaces special tool 61 1 135 from 09/2005

14= 61 0 315 Release tool for flat spring contacts with double detent tongue "Micro-Timer 2"

NOTE: Replaces special tool 61 1 151 from 09/2005

15= 61 0 316 Release tool for flat spring contacts with double detent tongue "SPT 4.8" "JPT 2.8"

NOTE: Replaces special tool 61 1 136 from 09/2005

16= 61 0 317 Release tool for LSK 8

NOTE: Replaces special tool 61 1 200 from 09/2005

17= 61 0 318 Release tool for "Maxi Power Timer 9.5"

NOTE: Replaces special tool 61 1 180 from 09/2005

18= 61 0 319 Release tool for sensor laminated contacts ("SLK 2.8")

NOTE: Replaces special tool 61 1 148 from 09/2005. To be replaced by special tool 61 0 333 from 02/2008!

19= 61 0 321 Release tool for sensor laminated contacts with release ("SLK 2.8")

20= 61 0 322 Release tool for mini laminated contact ("MLK 1.2mm")

21= 61 0 323 Release tool for flat spring contacts with a detent tongue (MQS)

NOTE: Replaces special tool SWZ 61 1 152 from 09/2005

22= 61 0 324 Release tool for secondary lock

NOTE: Universal tool for damage-free opening and removal of secondary locks

23= 61 0 329 Case with foam insert without tools

NOTE: Storage system for release tools from set 61 0 300

24= 61 0 325 Release tool "JPT"

25= 61 0 326 Release tool "MQS"

NOTE: For releasing all micro contacts

26= 61 0 327 Insertion aid

NOTE: For inserting contacts (0.64 - 1.2 mm) in housing

27= 61 0 328 Insertion aid

NOTE: For inserting contacts (2.8 - 4.8 mm) in housing

28= 61 0 331 Release tool "SLK 5.8"

NOTE: For releasing "SLK 5.8 mm" contacts

29= 61 0 332 Release tool

NOTE: For releasing "MQS 0.64 mm" contacts

30= 61 0 333 Release tool

NOTE: For releasing "Mcon 2.8" contacts. Replaces special tool 61 0 319 from 2008.