34 1 130 Installation sleeves

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

Note: For mounting dust caps on brake piston

Series: E39, E52, E53, E60, E61, E63, E64, E65, E66, E67

Storage location: A35

SI number: 1 01 97 (173)

Order number: 34 1 130

Installation sleeves

Fig 1: Identifying Installation Sleeves (34 1 130)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

34 1 132 Press-in sleeve

NOTE: Diameter 58 mm for rear dust cap - Series: E52, E53, E60, E65, E66, E67

34 1 133 Sleeve

NOTE: For installing dust sleeve on floating caliper of front axle - Series: E53, E65, E60, E66, E67