33 4 160 Removal/installation thrust pieces

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

In conjunction with: 33 3 312, 33 3 314, 33 3 315

Note: For removing and installing rubber mount at front of rear axle differential (split rubber mount)

Series: E38, E39, E60, E61, E63, E64, E65, E66, E67, E81, E82, E87, E88, E90, E91, E92, E93, RR1

Storage location: B33

SI number: 1 06 94 (801)

Order number: 33 4 160

Removal/installation thrust pieces

Fig 1: Identifying Removal/Installation Thrust Pieces (33 4 160)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 33 4 161 Support tube

NOTE: For removal

2 = 33 4 162 Support plate

NOTE: For removal

4 = 33 4 164 Thrust piece

NOTE: For installation

5 = 33 4 165 Guide tube

NOTE: For installation

6 = 33 4 166 Support plate

NOTE: For installation