33 4 150 Removal and installation tool

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

In conjunction with: 33 4 140, 33 3 371

Note: For removing and installing rubber mount on rear axle carrier

Series: E38, E39, E39tou, E46, E52, E53, E60, E61, E63, E64, E65, E66, E67, E70, E71, E83, E85, E86, RR1, RR2

Storage location: B38, B8, C7, C8

SI number: 1 06 94 (801)

Order number: 33 4 150

Removal and installation tool

Fig 1: Identifying Removal And Installation Tool (33 4 150)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 33 4 151 Pressure plate

NOTE: For removal / model series: E38, E39, E46, E52

2 = 33 4 152 Pressure plate

NOTE: For installation Model series: E38, E39, E46, E52, RR1

3 = 33 4 153 Support plate

NOTE: For installation / model series: E38, E39, E46, E52

4 = 33 4 154 Spindle with lock nut

NOTE: Model series: E38, E39, E46, E52, E60, E61, E63, E64

5 = 33 4 155 Nut with bearing

In conjunction with: 33 3 371 (E46)

6 = 33 4 156 Spindle, long

NOTE: Model series: E39/2, E65, E66, E67, RR1

7 = 33 4 157 Pressure plate

NOTE: For installation - model series: E39/2, E65, E66, E67, RR1

8 = 33 4 158 Pressure plate

NOTE: For removal - model series: E53, E65, E66, E67, RR1

9 = 33 4 159 Support disk

NOTE: For installation - model series: E53, E65, E66, E67, RR1