33 3 310 Removal/installation tool kit

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

In conjunction with: 33 4 181 (E46)

Note: For removing and installing rubber mounts in rear axle suspension, front and rear

Series: E31, E36, E38, E46, E60, E61, E63, E64, E65, E66, E67, E81, E82, E83, E85, E86, E87, E88, E90, E91, E92, E93, R53, RR1

Storage location: A7

SI number: 1 05 90 (207)

Order number: 33 3 310

Removal/installation tool kit

Fig 1: Identifying Removal/Installation Tool Kit (33 3 310)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 33 3 311 Locator sleeve

NOTE: For removing and installing rubber mount / model series: E31, E36

2 = 33 3 312 Thrust piece

NOTE: For removing rubber mount at rear differential cover / model series: E31, E36, E38, E60, E61, E63, E64, E65, E66, E67, RR1

3 = 33 3 313 Thrust piece

NOTE: For installing rubber mount on rear differential cover - model series: E31, E36, E38 For removing rubber mount at rear differential cover - model series: E46

4 = 33 3 314 Spindle

NOTE: For removing and installing rubber mount Model series: E31, E36, E38, E46, E60, E61, E63, E64, E65, E66, E67, E85, RR1

5 = 33 3 315 Nut with bearing

NOTE: Model series: E31, E36, E38, E46, E60, E61, E63, E64, E65, E66, E67, E85, RR1

6 = 33 3 316 Thrust piece

NOTE: For installing rear rubber mount in rear axle carrier / model series: E31

In conjunction with: 33 3 333 and 33 3 334