33 2 200 Fixture

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

In conjunction with: 33 4 200, 33 5 070

Note: For removing and installing output shaft in drive flange as well as for removing front wheel bearing unit.

Series: E30, E31, E32, E34, E36, E36/2, E36/3, E36/5, E36/7, E36/C, E36tou, E38, E38/3, E39, E39PL, E39tou, E46, E52, E53, E60, E61, E63, E64, E65, E66, E67, E70, E71, E81, E82, E83, E85, E86, E87, E88, E90, E91, E92, E93, RR1, RR2

Order number: 33 2 200

Fixture

Consisting of:

1 = 33 2 201 Basic body

2 = 33 2 202 Counterholder

In conjunction with: 33 5 070

3 = 33 2 203 Spindle M20x1.5 / length 150 mm

NOTE: For pressing out. Model series: E30, E31, E32, E36, E38, E39, E46, E53, E65, E66, E67, E83, E85

4 = 33 2 204 Spindle M20x1.5 / length 180 mm

NOTE: For drawing in. Model series: E30

5 = 33 2 205 Spindle M20x1.5 / length 190 mm

NOTE: For drawing in. Connection: M27x1.5 Model series: E31, E52, E53, E60, E61, E65, E66, E67, E83

6 = 33 2 206 Spindle M20x1.5 / length 190 mm

NOTE: For drawing in. Connection: M24x1.5 Model series: E36, E46

7 = 33 2 207 Threaded piece

8 = 33 2 208 Nut with thrust bearing

NOTE: Model series: E30, E31, E32, E36, E38, E39, E46, E52, E53, E60, E61, E65, E66, E67, E83, E85, RR1