31 3 030 Press-in and press-out tool

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

Note: For rubber bearings on trailing arm

Series: E60, E61, E63, E64, E65, E66, E67, E70, E81, E82, E83, E87, E88, E90, E91, E92, E93

Storage location: B46

SI number: 1 14 01 (766)

Order number: 31 3 030

Press-in and press-out tool

Fig 1: Identifying Press-In And Press-Out Tool (31 3 030)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 31 3 031 Thrust piece

2 = 31 3 032 Bushing