24 2 310 Tool kit for removing and installing reverse gear piston

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Note: For disassembling and assembling transmission for "Sealing intermediate plate" job

Transmission: A4S 270R, A4S 310R

SI number: 1 22 97(239)

Order number: 24 2 310

Tool kit for removing and installing reverse gear piston

Fig 1: Identifying Tool Kit For Removing And Installing Reverse Gear Piston (24 2 310)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 24 2 311 Pressure plate

NOTE: For removing and installing spring retainer

2 = 24 2 312 Spindle with pressure plate

NOTE: Spindle M14x1.5, nut M14, pressure plate and washer / For removing and installing spring retainer

3 = 24 2 313 Guide pin (2)

NOTE: For fixing gaskets and intermediate plates on intermediate housing

4 = 24 2 314 Slip bush

NOTE: For removing piston in cylinder of intermediate plate