11 9 490 Holding sleeve

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

Note: For protecting camshaft against damage by torsion spring (1 set = 20 pcs.)

Engine: N62, N62TU, N73

Storage location: C45

SI number: 1 14 01(766)

Order number: 11 9 490

Holding sleeve

Fig 1: Identifying Holding Sleeve (11 9 490)

Courtesy of BMW OF NORTH AMERICA, INC.