84 11 610 Removing and installing/replacing eject box (cordless keypad handset)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW M5, 2009 BMW M5, 2009 BMW 550i, 2008 BMW M5, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

If necessary, remove cordless keypad handset from eject box.
Remove FRESH-AIR GRILLE IN REAR CABIN .

If necessary, disconnect antenna plug (1).

Disconnect plug connection (2).

Unlock socket housing on plug connection (2) and slide out contact carrier.

Fig 1: Identifying Antenna Plug And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Unlock eject box (1) and fold up.

Release screws (2).

Feed out plug connection and remove eject box (1).

Installation:

Ensure correct cable routing in eject box (1).

Fig 2: Identifying Eject Box And Screws

Courtesy of BMW OF NORTH AMERICA, INC.