84 21 542 Removing and installing (replacing) hands-free charging electronics (High)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW M5, 2009 BMW M5, 2009 BMW 550i, 2008 BMW M5, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) .

NOTE: Comply with INSTRUCTIONS FOR HANDLING FIBRE OPTIC CABLES .

Necessary preliminary tasks:

Disconnect BATTERY NEGATIVE LEAD
Partially remove LUGGAGE COMPARTMENT FLOOR TRIM PANEL .
If necessary, remove storage tray for car jack
If necessary, remove spare wheel
Remove control unit cover

M5:

Remove hands-free charging electronics (1) from shell insert (2).

Fig 1: Identifying Hands-Free Charging Electronics From Shell

G05479325

Courtesy of BMW OF NORTH AMERICA, INC.

All:

Remove hands-free charging electronics (1) from device mounting (2).

Fig 2: Identifying Hands-Free Charging Electronics From Device Mounting

G05479326

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Remove hands-free charging electronics (2).

Fig 3: Identifying Hands-Free Charging Electronics And Plug Connection

G05479327

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out VEHICLE PROGRAMMING/CODING
If necessary, log mobile phone on to vehicle