72 14... Removing and installing/replacing Top Tether eyelets for child seat

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW M5, 2009 BMW M5, 2009 BMW 550i, 2008 BMW M5, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Two or three Top Tether eyelets are installed, depending on the model.

Lever out covers (1) and release screws underneath.

Remove Top Tether eyelets (2).

Tightening torque: see 3AZ in 52 24 REAR SEAT (NORMAL), MANUAL .

Fig 1: Identifying Covers And Top Tether Eyelets

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT:

Ensure Top Tether eyelets (1) are in correct installation position.

It must be possible for Top Tether eyelets (1) to be tilted in the direction of head restraints (2).

Fig 2: Identifying Head Restraints And Top Tether Eyelets

Courtesy of BMW OF NORTH AMERICA, INC.