66 31 016 Removing and installing/replacing long range sensor (LRR sensor) (from build date 03/2007)

WARNING: This page is about a different car, the 2010 BMW M5, 2009 BMW M5, 2009 BMW 550i, 2008 BMW M5, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Lever out trim (1) with special tool 00 9 317 (wedge) and remove.

Fig 1: Identifying Trim And Special Tool 00 9 317

Courtesy of BMW OF NORTH AMERICA, INC.

Tape off bumper in working area (1) with yellow plastic adhesive tape.

Unclip long range sensor (2) from mounting.

Installation:

Make sure long range sensor (2) is correctly seated.

Fig 2: Identifying Long Range Sensor

Courtesy of BMW OF NORTH AMERICA, INC.

Secure long range sensor (1) against falling out.

Disconnect plug connection (2) and remove long range sensor (1).

Fig 3: Identifying Plug Connection And Long Range Sensor

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out LRR sensor adjustment using BMW diagnosis system.
Carry out PROGRAMMING/CODING .