65 11... Notes regarding the adjustment of the installation position on the CD changer

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: To ensure trouble-free CD changer operation, ensure both suspension springs are correctly positioned (horizontal/vertical). If necessary, correct adjustment.
To avoid premature contamination of the CD changer, make sure the magazine compartment flap is permanently closed.

NOTE: For purposes of clarity, the following graphics show the CD changer removed.

NOTE:

Observe the following repair instructions if the magazine cannot be removed from the CD changer.
- Remove CD CHANGER MAGAZINE

Remove cover cap (1) from CD changer (2).

Fig 1: Identifying Cover Cap And CD Changer

Courtesy of BMW OF NORTH AMERICA, INC.

Arrange installation position of CD changer (2) with a suitable tool by sliding suspension spring (1) into required position.

Fig 2: Identifying CD Changer And Suspension Spring

Courtesy of BMW OF NORTH AMERICA, INC.