65 11 075 Removing and installing/replacing DVD changer

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on ESD PROTECTION (ELECTRO STATIC DISCHARGE) .

Necessary preliminary tasks:

Remove right luggage compartment TRIM PANEL .
Disconnect BATTERY NEGATIVE LEAD .
Remove LUGGAGE COMPARTMENT TRIM on left side panel.

NOTE: Follow instructions for HANDLING OPTICAL FIBRES .

Release screws (1).

Pull DVD changer (2) out of fixture (3).

Unlock and disconnect associated plug connection, remove CD changer (2).

Fig 1: Identifying DVD Changer And Fixture

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Release screws (1) and remove both holders (2) from DVD changer (3).

Installation:

If necessary, remove transportation lock.

Fig 2: Identifying Screws And Holders

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out PROGRAMMING/CODING .