65 12 250 Removing and installing/replacing headphones module

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Disconnect BATTERY NEGATIVE LEAD .
If necessary, remove emergency wheel

Take off cover for control units (1).

Installation:

Make sure cover for control units (1) is correctly seated on locating pins (2).

Fig 1: Identifying Control Units And Locating Pins

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Illustrations show removal from the E60.

Unfasten plug connection (1) and disconnect.

Remove headphones module (2) upwards out of mounting for control units (3).

Fig 2: Identifying Headphones Module And Control Units

Courtesy of BMW OF NORTH AMERICA, INC.