65 77 541 Removing and installing/replacing front left or right acceleration sensor
WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Acceleration sensor only fitted in US version!
Necessary preliminary tasks:
- Remove FRONT BUMPER TRIM .
Disconnect plug connection (1).
Release screws (2) and remove acceleration sensor (3).
Installation:
Tightening torque: 7 Nm
Replace screws (2).