63 21 101 Replacing sealing frame for left or right rear light
WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove REAR LIGHT .
Detach sealing frame for rear light (1) from rear light (2).
Installation:
Sealing frame for rear light (1) is centered via openings for threaded pins (3).
Make sure sealing frame for rear light (1) is correctly bonded all round on rear light (2).