63 17 060 Removing and installing/replacing left or right front fog lamp (M aerodynamic kit)

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove FRONT UNDERBODY PROTECTION .

Release screws (1).

Remove fog lamp wheel arch cover (2).

Fig 1: Identifying Fog Lamp Wheel Arch Cover And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Release screws (2). Tightening torque: see 1AZ in 63 17 FRONT FOG LAMPS, ADDITIONAL LAMPS .

Feed fog lamp (3) in direction of arrow out of mounting (4) and remove.

Fig 2: Identifying Plug Connection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

If necessary, remove bulb.

ADJUST front fog lamps.