61 31 492 Replacing (removing and installing) level switch for windscreen washer unit

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For purposes of clarity, illustration shows front wheel removed.

Release screws.

Fold back wheel arch trim (1) in direction of arrow.

Fig 1: Identifying Wheel Arch Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Turn level switch for windscreen washer unit (2) in direction of arrow and remove towards bottom from fluid reservoir for windscreen washer unit (3).

Fig 2: Identifying Plug Connection And Windscreen Washer Unit

Courtesy of BMW OF NORTH AMERICA, INC.