61 31 233 Removing and installing/replacing Lane Departure Warning motor electrics (sport steering wheel)

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove decorative bar from steering wheel .

Release screws (1) and remove retaining plate (2).

Tightening torque, see 32 33 2AZ in 32 33 STEERING WHEEL

Fig 1: Identifying Screws And Retaining Plate

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Release screw (2).

Release screws (3) and remove motor electrics (4) complete with electrical wires.

Installation:

Replace screws (2 and 3).

Tightening torque, see 32 33 3AZ in 32 33 STEERING WHEEL
Tightening torque, see 32 33 4AZ in 32 33 STEERING WHEEL

Ensure correct cable routing.

Fig 2: Identifying Screws, Motor Electrics And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.