61 31 079 Removing and installing/replacing switch for hazard warning flashers/central locking
WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 64 1 020 . See HEATING AND AIR CONDITIONING - SPECIAL TOOLS .
IMPORTANT:
Risk of damage!
Protect middle fresh-air grille decorative trim in working area against damage, tape off if necessary.
Protect middle fresh-air grille decorative trim in working area against damage, tape off if necessary.
Lever out switch for hazard warning system/central locking (1) with special tool 64 1 020 and pull back.
Disconnect associated plug connection and remove switch for hazard warning flashers/central locking (1).