61 31 023 Removing and installing/replacing Start/Stop switch
WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 00 9 341 . See MAINTENANCE AND GENERAL INFORMATION - SPECIAL TOOLS .
Attach special tool 00 9 341 as illustrated.
Unclip Start/Stop switch with associated ribbon cable in direction of arrow.
IMPORTANT:
Carefully unlock and disconnect associated plug connection for ribbon cable.
Replace the ribbon cable if damaged.
Replace the ribbon cable if damaged.
Remove Start/Stop switch.