61 36 560 Removing and installing/replacing headlight washer relay

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Open glovebox.

Unclip pin (1) from shock absorber (2).

Fig 1: Identifying Pin And Shock Absorber

Courtesy of BMW OF NORTH AMERICA, INC.

Open rotary clips (1) and remove cover (2) in direction of arrow.

Fig 2: Identifying Rotary Clips And Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Detach relay (1).

Fig 3: Identifying Relay

Courtesy of BMW OF NORTH AMERICA, INC.