84 10 050 Removing and installing (replacing) USB hub

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection ).

Necessary preliminary tasks:

Remove luggage compartment trim on left side panel . See 51 47 210 REMOVING AND INSTALLING/REPLACING TRUNK TRIM PANEL ON LEFT SIDE PANEL .
Partially detach . See 51 47 151 REMOVING AND INSTALLING/REPLACING LEFT LUGGAGE COMPARTMENT WHEEL ARCH TRIM .

Release screws (1) and feed out USB hub with holder (2).

Fig 1: Identifying Screws And Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Release nuts (1) and disconnect plug connections (2).

Fig 2: Identifying Nuts And Plug Connections

Courtesy of BMW OF NORTH AMERICA, INC.