66 31 100 Removing and installing/replacing longitudinal dynamics module

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Disconnect battery negative lead
Release distribution box and place to one side.

Disconnect plug connection (1).

Unlock retaining tab (2) and remove longitudinal dynamics module.

Fig 1: Identifying Plug Connection And Retaining Tab

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out coding/programming.