LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1816 (General Electrical System - Repair) >> Control Units, Modules, Sensors, Aerials >> 61 35 900 Removing and installing/replacing ring antenna of electronic immobilizer

61 35 900 Removing and installing/replacing ring antenna of electronic immobilizer

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required: 

Necessary preliminary tasks: 

Disconnect plug connection (1).

Position special tool 61 3 300  as illustrated with flattened side (A) to ring antenna of electronic immobilizer (2).

Lever out ring antenna of electronic immobilizer (2) in direction of arrow and remove.

Fig 1: Identifying Electronic Immobilizer And Plug Connection
G05513682Courtesy of BMW OF NORTH AMERICA, INC.