52 26 030 Removing and installing/replacing armrest for rear seat backrest (through-loading system)
WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
Fold down right backrest.
Feed out top cover (1) or detach from armrest (2).
Release screw (3).
Tightening torque: see 4AZ in 52 26 REAR SEATS (THROUGH-LOADING SYSTEM) .
Feed armrest first forwards and then to right out of left backrest mount (4).
IMPORTANT:
Cover must not be trapped during installation.