52 24 045 Removing and installing/replacing backrest frame
WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove backrest cover with PADDING
Replacement only:
If necessary, release all screws and remove parts:
PARTS DESCRIPTION CHART
| No. | Description | Tightening torque |
|---|---|---|
| 1 | Head restraint mount | Screws, top: 5.6 Nm |
| Screws, bottom: 8 Nm | ||
| 2 | Armrest lock | 8 Nm |
| 3 | Backrest lock | 19 Nm |