52 14... Removing and installing outer upper rail trim with electric anchor fitting tensioner (from 04/2004)

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Driver's seat only:

NOTE: Version with anchor fitting tensioner from 04/2004.

Lever trim (3) out of seat mechanism:

upwards,
slide towards rear

and feed out of anchor fitting tensioner.

Installation:

Secure plug connection with felt strip against unlocking.

Lock on plug connection to anchor fitting tensioner can be unlocked when trim is fitted.

Fig 1: Levering Trim Out Of Seat Mechanism

Courtesy of BMW OF NORTH AMERICA, INC.