51 24 130 Removing and installing/replacing striker for rear lid lock

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove TRIM ON REAR APRON

Release screws (1).

Remove striker for rear lid lock (2) (lower section of rear lid lock).

Installation:

Adjust rear lid lock.

Fig 1: Identifying Rear Lid Lock

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Striker and rear lid lock must not be greased.